HP DesignJet 2500CP Service Manual page 81

Table of Contents

Advertisement

Message
Explanation and Action
System error
An internal error has occurred and a system error number is displayed.
XXXXXX
Press
cannot continue, turn off the printer, and then turn it on again. If you still
see the system error message then refer to Chapter 2 for more information.
System error
An internal error has occurred and a system error number is displayed.
XXXXXX
Press
XXXXXXXX
cannot continue, turn off the printer, and then turn it on again. If you still
see the system error message then refer to Chapter 2 for more information.
UV inks YES
After you have finished installing a new ink cartridge, you are asked to confirm
installed ΝΟ
that you have changed the type of ink cartridges from Imaging to UV Pigmented.
Press
Pigmented.
Press
UV Pigmented. You will then be given the opportunity of replacing the incorrect
ink cartridges by the correct ones.
Verify ink system
At power-on, the printer has detected an error in the ink systems shown by
JJ-J
flashing squares.
Press
STATUS Messages
Message
Explanation and Action
STATUS
You have pressed the
cleaners and you have pressed
Accessing head
access the printhead cleaners.
cleaners
Wait until the carriage is in position.
STATUS
You have pressed the
printheads and you have pressed
Accessing printheads
you can access the printheads.
Wait until the carriage is in position.
STATUS
The printer is printing a pattern to align the printheads.
Aligning printheads
Wait until the pattern has been printed.
User Messages
Enter; this may clear the error and allow you to continue. If you
Enter; this may clear the error and allow you to continue. If you
to confirm that you have changed the ink cartridges from Imaging to UV
to indicate that you have not changed the ink cartridges from Imaging to
to continue. You should check the ink systems immediately.
Replace Ink System key or there is an error in the head
Replace Ink System key or there is an error in the
HP DesignJet CP Series Printers
or . The carriage is moving so that you can
or . The carriage is moving out so that
3-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Designjet 3500cpDesignjet 2000cpDesignjet 3000cp

Table of Contents