D09. Mio Presence - HP DesignJet 2500CP Service Manual

D09. MIO Presence

The purpose of this test is to verify the presence of the MIO Card and the
communication between the MIO Card and Main PCA.
Perform the MIO Presence test as follows:
1 In the Diagnostics submenu, scroll to D09 MIO Presence" and press
Enter.
Diagnostics
D09 MIO Presence
2 If the test passes, the D0900 OK" message is displayed on the
front panel.
3 If the test fails, or if the MIO card is not installed, the D0901 Fail"
message is displayed on the front panel.
If the MIO card fails the test, try one of the following:
1 Reseat the MIO card and perform the MIO test again.
2 Replace the MIO card and perform the MIO test again.
Service Tests HP DesignJet CP Series Printers 4-21