Power; Interconnect Cables; A49 Connections; C49 Connections - Arcam FMJ C49 Handbook

A49
Pre-amplifier output
connections PRE OUT provides the pre-amp output for
Audio inputs
use in a bi-amplified system (for example,
AUX, Tuner, SAT, BD, with a P49/P349 power amplifier). See
and are all
PVR AV page 11 for more information.
line-level inputs.
Balanced XLR audio inputs
See page 10 for
more information. Use these sockets to connect to your
PHONO (MM) source component if the source has
has different balanced XLR outputs. If your source
characteristics. See component has unbalanced outputs,
page 20 for the phono use the phono inputs. For more
input specification. information see page 10.
PHONO
GROUND PHONO RECORD PRE AUX R AUX L PRE OUT R PRE OUT L
ONLY (MM) CD TUNER SAT BD PVR AV OUT OUT
R L
PHONO AUX
4–16 OHMS. CLASS 2 WIRING 4–16 OHMS. CLASS 2 WIRING
SPEAKER 1 SPEAKER 2 SPEAKER 2
Phono earth terminal Speaker terminals
For connecting your turntable The A49 is equipped with two
earth lead, if required. pairs of speaker terminals. See
page 15 for information on
Note that this terminal must
connecting loudspeakers.
not be used as a safety earth.
Record output
is a line level output for
RECORD OUT
use in recording from other sources.
See page 11 for more information.
Balanced XLR audio outputs
Provides a balanced pre-out for use
in a bi-amplified system (for example
with a P49/P349 power amplifer). See
page 11 for more information.
Accessory power
6V 3.5mm mono jack socket for accessory cable
Phones
(supplied). Cable provides two 2.1mm DC jacks
to power 6V r series accessories. 3.5mm stereo jack socket,
12V 2.5mm DC jack socket for accessory cable intended for use with a set of
(supplied). Cable provides a 2.5mm DC jack to headphones. See page 11 for
power 12V r series accessories. more information.
POWER / STANDBY
PH O N O 20
TRIGGER OUT
ACCESSORY

POWER

MUTE DISPLAY BALANCE
6V 1A 12V 1.5A
CD TUNER SAT BD PVR AV SP1 SP2 PHONES
POWER INLET SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
SUPPLY
SPEAKER 1 VOLTAGE
110-120V/220-240V ~ 50-60 Hz
350W MAX
Power inlet Voltage select
Connect the correct Ensure that the voltage selected
mains cable here. matches your local power supply.
Trigger output
allows the A49 to control the
TRIGGER OUT
power state of any connected equipment, Note
such as a P49/P349 power amplifier. In
Please read the 'Placing the unit', 'Power' and
normal use there is no need to make any
'Interconnect cables' sections on page 5 before
connections to these outputs.
connecting up your A49 integrated amplifier!
E-6
C49
connections
Audio inputs
AUX, Tuner, SAT, BD,
and
PVR
line-level inputs.
See page 10 for
more information.
PHONO (MM)
has different
characteristics. See
page 21 for the phono
input specification.
PHONO
GROUND PHONO
ONLY (MM) CD TUNER SAT BD PVR
POWER
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.
Pre-amplifier output Balanced XLR audio outputs
PRE OUT provides an unbalanced output Provides a balanced output for
for connection to a power amplifier (for connection to a power amplifier (for
example a P49/P349). See page 11 for example a P49/P349). See page 11 for
are all
AV more information. more information.
Balanced XLR audio inputs Accessory power
Use these sockets to connect to your 6V 3.5mm mono jack socket for accessory cable
source component if the source has (supplied). Cable provides two 2.1mm DC jacks
balanced XLR outputs. If your source to power 6V r series accessories.
component has unbalanced outputs, 12V 2.5mm DC jack socket for accessory cable
use the phono inputs. For more (supplied). Cable provides a 2.5mm DC jack to
information see page 10. power 12V r series accessories.
PHO N O 20
RECORD PRE AUX R AUX L PRE OUT R PRE OUT L TRIGGER OUT
AV OUT OUT
ACCESSORY
POWER
6V 1A 12V 1.5A
PHONO AUX CD TUNER SAT
POWER INLET
110-120V/220-240V ~ 50-60 Hz
350W MAX
Record output Power inlet
RECORD OUT is a line level output for Connect the correct
use in recording from other sources. mains cable here.
See page 11 for more information.
Trigger output
allows the C49 to control the
TRIGGER OUT
power state of any connected equipment,
such as a P49/P349 power amplifier. In
normal use there is no need to make any
connections to these outputs.
E-7
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones. See page 11 for
more information.
POWER / STANDBY
MUTE DISPLAY BALANCE
BD PVR AV PHONES
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
SUPPLY
VOLTAGE
POWER
Voltage select
Ensure that the voltage selected
matches your local power supply.
Note
Please read the 'Placing the unit', 'Power' and
'Interconnect cables' sections on page 5 before
connecting up your C49 pre-amplifier!