Turning the wireless network On/O /& Reset Router
The wireless mode is on. To turn it o , press and keep pressed the
WLAN button on the side of the ADSL2+ Router until the WLAN LED
on the top part of the ADSL2+ Router goes o . To turn the wireless
mode on, press and keep the same button pressed for more than
1 second. The WLAN LED will go on.
If you need to reset the factory settings of the ADSL2+ Router, rst
make sure the router is on. Press and keep the RESET button on the
back of the ADSL2+ Router pressed until all LEDs (except the Power
LED) go o .
Wait until the ADSL2+ Router LEDs come back on. Resetting the
factory settings will clear any information entered and saved in the
ADSL2+ Router.