Advertisement
K562e
Quick Start-02
2.1 Wireless Network Expansion
When you already have Wi-Fi in your home and need to expand the Wi-Fi
coverage, you can use the WPS button to connect the K562e to the existing Wi-Fi
network.
● This section assumes that your home network supports WPS features. If your
● Three-level Wi-Fi cascading is not allowed on the K562e network. A maximum
WPS Code Pairing Operation Guide
1.
2.
Issue 02 (2021-06-25)
NO TICE
home network does not support WPS features, you can log in to the K562e web
page to configure parameters and expand Wi-Fi.
of two-level Wi-Fi cascading is supported.
Place the K562e close to the home gateway (within 2 meters) and power it
on.
After the K562e starts up, press and hold the WPS buttons of the K562e and
the home gateway for 3 to 5 seconds in turn within 2 minutes.
NO TE
The WLAN indicator of the K562e blinks during the pairing.
Copyright © Huawei Technologies Co., Ltd.
2
Network Expansion
2 Network Expansion
4
Hide quick links:
Advertisement
