Related Manuals for Huawei OptiXstar HG8140H5
Summary of Contents for Huawei OptiXstar HG8140H5
- Page 1 Huawei OptiXstar HG8140H5 Quick Start for QR code Issue Date 2022-12-08 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
Huawei OptiXstar HG8140H5 Quick Start for QR code Contents Contents 1 Placing the Device........................1 2 Connecting Cables........................3 3 Indicator Description......................5 4 Technical Specifications......................7 5 FAQs............................8 Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. -
Page 4: Placing The Device
The figure below shows an ONT that is horizontally placed on a desk. NO TE The appearance shown in this document may be different from the actual appearance of the product. The actual product prevails. Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. - Page 5 ONT onto the screws. NO TE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The screw head should be between 6mm and 9mm in diameter. Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd.
-
Page 6: Connecting Cables
Huawei OptiXstar HG8140H5 Quick Start for QR code 2 Connecting Cables Connecting Cables Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. - Page 7 (longer than 10s) to restore the device to the default settings and reset the device. NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.
-
Page 8: Indicator Description
The ONT fails to be registered with the softswitch. every 2 seconds The POTS port is disabled. Status Description Status Status The ONT is prohibited by the upper-layer device or blinks abnormally. Contact the service provider for help. Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. - Page 9 The ONT is not connected to fibers or does once every not receive optical signals. 2 seconds Blinks Blinks The hardware is faulty. once once every evey 2 2 seconds seconds Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd.
-
Page 10: Technical Specifications
Ambient humidity: 5%–95% (non-condensing) ● Dimensions (H x W x D): 30 mm x 168 mm x 115 mm (without pads) ● Weight: About 230g ● Maximum system power consumption: 7 W Issue 01 (2022-12-08) Copyright © Huawei Technologies Co., Ltd. -
Page 11: Faqs
58/Edge 14/Firefox 54/Safari 10/Opera 55 or later is recommended. If the browser of an earlier version is used, compatibility issues may occur. Use a network cable to connect a PC to the Huawei ONT. Set the IP address of the PC in the same subnet as the web address of the For example, if the web address of the Huawei ONT is Huawei ONT. - Page 12 How do I restore the Huawei ONT to factory setting? Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT. If the indicator is off and then is lit, the system restarts successfully.