Pro-Form XP 185 U User Manual page 8

6. 6 Tip: Avoid pinching the wires during this
step. Orient the Console Bracket (55) as shown
and then insert the Upper Wire Harness (32)
and the left and right pulse wires through the
Console Bracket. Attach the Console Bracket to
the Upright (3) with two M8 x 25mm Patch
Screws (50).
5O
Pul_
Wires
Avoid pinching the
wires during this step
7,
While another person holds the Console (6)
near the Upright (3), connect the console wires
to the Upper Wire Harness (32) and to the
pulse wires.
Tip: Avoid pinching the wires during this
step, Insert the excess wires downward into the
Upright (3). Attach the Console (6) to the
Console Bracket (55) with four M4 x 16mm
Screws (40).
See step 5. Tighten the M4 x 16mm Screw (40).
Wires
Pul
Wires
Avoid pinching the
wires during this step
55
4O