Yaesu FTM-100DR Instruction Manual page 8

3
Turn the DIAL, select [16 MY CALL SIGN (APRS)],
then press
The currently set call signwill be displayed.
4
Press .
The cursor will shift to the left of the call sign.
5
Turn the DIAL and select the character.
Tip Press
Press
Press
Press
Press
Please refer to "Input characters" (
6
Press [
The cursor will shift to the right.
7
Repeat steps 5 and 6 to enter the call sign.
Up to 6 digits can be input for the call sign.
[If not setting the SSID]
To set the SSID, please proceed to Step 10.
8
Press .
The entered call sign will be registered.
9
Press for one second or longer.
The display will return to the previous screen.
[If setting the SSID]
10
Press [
The cursor will shift to the SSID item.
11
Turn the DIAL and select the SSID.
12
Press .
The enteredcall signand SSIDwill beregistered.
13
Press for one second or longer.
The display will return to the previous screen.
.
[ ] → This switches between letters
and numbers.
[ ] → This deletes all characters to the
right of the cursor.
[ ] → This shifts the cursor to the left.
[ ] → The cursor will shift to the right.
[ ] → This deletes all characters to the left of the cursor.
].
].
P.20) in the basic operating manual for details.
7
APRS Initial Settings