Yaesu FTM-100DR Instruction Manual page 79

3
Turn the DIAL, select [25 VOICE ALERT], then press
.
The screen for setting the voice alert function will be
displayed.
4
Turn the DIAL and select [1 VOICE ALERT].
5
Press to select the voice alert action.
Press to switch through the voice alert action
options in the following order.
"NORMAL", "TONE SQL", "DCS", "RX-TSQL", RX-DCS"
NORMAL: The voice alert function will be turned off.
TONE SQL: A tone squelch will be used for sending and receiving voice signals. A
tone signal will also be appended when sending APRS data.
After selecting "TONE SQL", the tone frequency to be set next will be
used as the squelch target.
DCS: DCS will be used in sending and receiving voice signals. The DCS code will
also be appended when sending APRS data.
After selecting "DCS", the DCS code to be set next will be used as the squelch
target.
RX-TSQL: Although a tone squelch is used in sending and receiving voice signals, a
tone signal is not appended when sending APRS data.
After selecting "RX-TSQL", the tone frequency to be set next will be used
as the squelch target.
RX-DCS: Although DCS is used in sending and receiving voice signals, the DCS
code is not appended when sending APRS data.
After selecting "RX-DCS", the DCS code to be set next will be used as the
squelch target.
Tip Factory default value: NORMAL
6
Turn the DIAL, select [2 TONE SQL], then press
.
7
Turn the DIAL, select tone frequency and press
.
A frequency between 67.0 Hz and 254.1 Hz can be set.
Tip Factory default value: 100.0 Hz
8
Turn the DIAL, select [3 DCS], then press
9
Turn the DIAL and select DCS code.
A value between 023 and 754 can be set.
Tip Factory default value: 023
10
Press for one second or longer.
The voice alert function will be set and the display will return to the previous screen.
Using the APRS set-up menu
.
78