Automatic Response Setting Of Received Messages - Yaesu FTM-100DR Instruction Manual

6
Press .
The screen will return to the list of message groups and the registered group filter
will be displayed.
7
Press for one second or longer.
The group filter will be set and the display will return to the previous screen.

Automatic response setting of received messages

A reply message set up beforehand can be automatically sent out upon receiving a
message.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [18 MESSAGE REPLY], then
press .
The automatic reply setting screen will be displayed.
4
Turn the DIAL and select [1 REPLY].
5
Press and select ON or OFF.
Pressing
ON: A reply message is returned automatically when
a message is received.
OFF: A reply message is not returned when a message is received.
Tip Factory shipping value: OFF
6
Turn the DIAL, select [2 CALLSIGN], then press
.
The cursor will shift to the left of the call sign.
Tip Please set this only when you want to reply to a specific
station. Please proceed to Step9if this is not required.
7
Turnthe DIAL and select characters.
Please register the call sign as follows.
∗∗∗∗∗∗-NN
∗: call sign (6 characters maximum)
NN: SSID (a number between 1 and 15 or nil)
Tip You can enter capital letters, numbers, and a certain symbol (only "∗" can be used).
Press
Press
Press
Press
Press
Please refer to "Input characters" (
turns this function ON and OFF.
[ ] → This switches between letters, numbers, and ∗.
[ ] → This deletes all characters to the right of the cursor..
[ ] → The cursor will shift to the left.
[ ] → The cursor will shift to the right.
[ ] → This deletes all characters to the left of the cursor.
Using the APRS set-up menu
.
P. 20) in the basic operating manual for details.
71