Voice Alert Function Setting - Yaesu FTM-100DR Instruction Manual

"ALL", "MOBILE", "FREQUENCY", "OBJECT/ITEM", "DIGIPEATER", "VoIP",
"WEATHER", "YAESU", "OTHER PACKET", "CALL RINGER", "RANGE RINGER",
"1200 bps" and "9600 bps"
ALL: All the received beacons will be displayed.
MOBILE: Only the mobile stations will be displayed.
FREQUENCY: Only station with frequency information will be displayed.
OBJECT/ITEM: Only object stations and item stations will be displayed.
DIGIPEATER: Only digipeater stations will be displayed.
VoIP: Only VOIP station such as WIRES will be displayed.
WEATHER: Only meteorological stations will be displayed.
YAESU: Only stations which are using Yaesu wireless transceivers will be displayed.
OTHER PACKET: Only RAW NMEA data stations, status stations and non-APRS
CALL RINGER: Only information of call sign ringer stations set under [10 APRS] →
RANGE RINGER: Only information of stations deemed as nearby stations according
1200 bps: Only stations received using 1200 bps packets will be displayed.
9600 bps: Only stations received using 9600 bps packets will be displayed.
Tip Factory shipping value: ALL
7
Press for one second or longer.
The beacon type and sorting condition for the station list will be set and the display
will return to the previous screen.
Tips
• To enable SORT, press
• When a new beacon is received after sorting, it will be added to the top of the list without being
sorted. The sorting order will be restored to the initial setting when the power supply is cut off.
Please carry out sorting one more time after the power supply is turned on.

Voice alert function setting

This is an audio notification function that will announce the presence of other stations
which can communicate via voice communications.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
packet information that cannot be analyzed are displayed. Set
"OTHER" to ON under [10 APRS] → [3 APRS FILTER] in the set-
up menu to display non-APRS packets that cannot be analyzed.
[9 APRS RINGER (CALL)] in the set-up menu will be displayed.
to "7 RNG RINGER" settings that are set under [10 APRS] → [8
APRS RINGER] in the set-up menu will be displayed.
[ ] on the "STATION LIST" screen, then press
Using the APRS set-up menu
.
77
[ ].