Yaesu FTM-100DR Instruction Manual page 10

4
Turn the DIAL, select [ICON 1], then press
The code displayed within the parentheses [ ] will
blink.
5
Turn the DIAL to display the combination of
preferred symbols and codes.
6
Press
The symbol will be confirmed.
7
Repeat Steps 4 to 6 when setting [ICON 2] and [ICON 3] as well.
8
Turn the DIAL to select the pattern that you want to use immediately from among
[ICON 1] to [ICON 3].
9
Press for one second or longer.
The display will return to the previous screen.
● Setting preferred symbols
You can change the code and set your own symbol when the symbol that you want is
not available.
The two characters of the code refer to the following contents.
• First character: Table ID
This indicates the classification of the symbol. It is a code used for classifying the
symbols into basic symbols, substitute symbols and symbols with an overlay.
• Second character: Symbol character
This indicates the symbol pattern. A number and symbol is assigned to each
pattern.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [21 MY SYMBOL], then press
.
The screen for selecting the symbol will be
displayed.
.
.
9
APRS Initial Settings