Yaesu FTM-100DR Instruction Manual page 6

6
Turn the DIAL, select [20 MY POSITION], then press
.
The screen for setting your own station's information
will be displayed.
7
Press .
The cursor will shift to the latitude item.
8
Turn the DIAL, select north latitude (N) or south
latitude (S), then press
The cursor will shift to the "degrees" setting item.
Tip Press [
Press [
The cursor will shift to the right (or left) each time
9
Turn the DIAL, input the degrees, then press
[ ].
The cursor will shift to the "minutes" setting item.
10
Turn the DIAL, input the minutes, then press
[ ].
The cursor will shift to the "1/100 minutes" setting
item.
11
Turn the DIAL, input the 1/100 minutes value, then
press [
The cursor will shift to the longitude item.
12
Turn the DIAL, select east longitude (E) or west
longitude (W), then press
The cursor will shift to the "degrees" setting item.
13
In the same way as for steps 9 to 11, input the
degrees, minutes and 1/100 minutes.
14
Press .
The latitude and longitude will be set.
15
Press for one second or longer.
The display will return to the previous screen.
Tips
• Please use the map of WGS-84 (world geodetic reference system) to find out the latitude and
longitude.
• In this device, the position information is displayed using both second and 1/100th minute formats.
Please check and enter the map display method to be used (second÷60×100=1/100 minute).
[ ].
] → The cursor will shift to the left.
] → The cursor will shift to the right.
].
[
(or
].
5
APRS Initial Settings
) is pressed.