Assembling Your Blender; Selecting The Speed - Oster 6805-50 Instruction Manual

INSTRUCTIONS FOR USE
1.
1. Turn Jar upside down so the small opening is at the top. Place Sealing Ring over Jar opening.
2. Place Blade into Jar.
3. Snap Threaded Bottom Disc and Collar together. Place Collar over Blade and Jar.(Note: If there
zx are slots on top of Collar, line them up with notches on Jar.) Place the Collar on Jar and turn the
zx Threaded Bottom Disc clockwise to tighten.
4. Place Jar assembly onto base.
PUSH BUTTON MODEL
Slide switch to L High or M Low.
Push desired speed and blend ingredients to desired consistency.
Push OFF to stop the Blender and turn Blender off.
To use PULSE, select L High or M Low. Push PULSE and hold down for desired length of time.
Release PULSE and allow Blade to stop. Repeat cycle as desired.
TIP: Refer to the "Guide For Processing Foods in Blender" located on page 5 for information on
processing foods.

Assembling Your Blender

2.

Selecting The Speed

3.
English-3
4.
TIGHT