Assembling Your Blender; Selecting The Speed - Oster BLSTMG-B00 Instruction Manual

INSTRUCTION FOR USE

Assembling Your Blender

1.
2. 3. 4.
1. Turn Jar upside down so the small opening is at the top. Place Sealing Ring over Jar
opening.
2. Place Blade into Jar.
3. Place Threaded Bottom Cap on Jar and turn it clockwise to tighten.
4. Place Jar assembly onto base.

Selecting The Speed

Slide switch to s High or t Low. Push desired speed and blend ingredients to desired
consistency.
IMPORTANT: Do not operate blender continuously for more than 3 minutes.
Push off button "O" to stop the Blender and turn Blender off.
Using the Pulse Function " "
To use pulse, select the low t setting on the switch.
Push the Pulse Button " " (speed 4) and hold down for desired length of time.
Release the Pulse button " " and allow Blade to stop. Repeat cycle as desired.
TIP: Refer to the "Guide For Processing Foods in Blender" located on page 5 for information
on processing foods.
Using the Ice Crush Function" "
To use Ice Crush, select the high s setting on the switch.
Push the Ice Crush Button " " (speed 8) and hold down for desired lenght of time. Release
the Ice Crush Button " " and allow Blade to stop.
Repeat cycle as desired.
English-3