Panasonic WV-NM100 Operating Instructions Manual page 20

SETUP SETUP
< Settings for Connection type 3 >
Item Description of the parameter
IP address Set the IP address designated by your Internet service provider.
Netmask Set the subnet mask designated by your Internet service provider.
Default gateway Set the default gateway designated by your Internet service provider.
Network speed Set the network speed.
Use the default setting "Auto" for the network speed.
Selectable parameters: Auto (default setting), 100 Mbps (full duplex), 100 Mbps (half duplex),
10 Mbps (full duplex), 10 Mbps (half duplex)
HTTP port Use the default setting "80" for the HTTP port.
Host name Refer to your Internet service provider and set the designated host name if required.
BOOTP No setting required
DHCP Set to OFF.
DNS Set to ON when using the DNS.
Primary server Set the IP address of the DNS server when using the DNS.
Secondary server Refer to your Internet service provider for the IP address of the DNS server. Primary and sec-
ondary IP addresses can be set for the DNS.
If the camera is accessed via the Internet, set the global IP address.
20