Panasonic WV-NM100 Operating Instructions Manual page 16

SETUP SETUP
< Settings for Connection type 1 >
Item Description of the parameter
IP address Enter "xxx.yyy.zzz.nnn" for the IP address (where "xxx.yyy.zzz" should be the same numbers
assigned to the PC, and "nnn" should be a number from 2 to 254 except the same IP address
already assigned to the PC and any other cameras).
Netmask Use the default setting "255.255.255.0" for the subnet mask.
Default gateway If the IP address is set for "xxx.yyy.zzz.nnn", enter "xxx.yyy.zzz.1" for the default gateway.
Network speed Set the network speed.
Use the default setting "Auto" for the network speed.
Selectable parameters: Auto (default setting), 100 Mbps (full duplex), 100 Mbps (half duplex),
10 Mbps (full duplex), 10 Mbps (half duplex)
HTTP port Use the default setting "80" for the HTTP port.
Host name No setting required
BOOTP Set to ON when using the "Panasonic IP Setup" software.
DHCP Set to OFF.
DNS Set to OFF.
Primary server No setting required
Secondary server
16