Fujitsu DL3700 Pro User Manual page 93

<EMULATE>
<FONT>
COUR 10
COUR-I
<QUALITY>
User's Manual
#05 Chapter 5
Function
DEFAULT
LIST
SELF-TST
HEX-DUMP
V-ALMNT
To select a function from the <<FUNCTION>> menu:
1. Repeatedly press the LOCK button to position the red cursor
2. Press the FONT button or the MENU button to select the
DPL24C+ XL24E
PRSTG12 COMPRSD BOLDFCE
N.SAN-N N.SAN-B N.SAN-I
LETTER REPORT
5
Table 5.1 Setup Mode Functions (Cont.)
Resets factory defaults in MENU1 and
MENU2.
Prints a list of all currently selected options.
Runs the self-test.
Prints hex dumps.
Checks and corrects vertical print alignment.
on the plastic print guide under the function you require.
function. If the function has items and options, the printer
prints the first item and its options. The MENU1, MENU2,
HARDWRE, ADJUST, and CONFIG functions contain items
that have selectable options. The other functions have neither
items nor options.
The first three MENU1 items and their options are shown
below. Items are enclosed in single brackets < >.
ESC/P2
PICA 10 CORRESP OCR-B
TIMLS-N TIMLS-B TIMLS-I
DRAFT HI-DRAFT
11.08.1998, 23:02 Uhr
USING SETUP MODE
Purpose
OCR-A COUR-N COUR-B
DOWNLD0 DOWNLD1
5 - 5