Fujitsu DL3700 Pro User Manual page 123
Hide thumbs
Also See for DL3700 Pro:
- User manual (262 pages) ,
- User manual (264 pages) ,
- User manual (264 pages)
Table of Contents
Advertisement
User's Manual
#05 Chapter 5
NOTE: Underlined options are the factory defaults.
ADJUST
Items
<CNT-ORG>
<CNTFINE>
<CUT-ORG>
<CUTFINE>
35
Table 5.5 ADJUST Items and Options
Options
Sets the top-of-form for continu-
ous forms in increments of 1/6
inch (4.2 mm) from the physical
top of the page.
1/6 IN
The default is recommended if
:
your top margin is not software-
6/6 IN
specified. A setting of 1/6 inch
:
is preferable when your top
66/6 IN
margin is software-specified.
Fine-tunes the top-of-form
position for continuous forms.
0/180, ..., 29/180 Increases top-of-form in
increments of 1/180 inch
(0.14 mm).
Sets the top-of-form for single
sheets in increments of 1/6 inch
(4.2 mm) from the physical top
of the page.
1/6 IN
The default is recommended if
:
your top margin is not software-
6/6 IN
specified. A setting of 1/6 inch
:
is preferable when your top
66/6 IN
margin is software-specified.
Fine-tunes the top-of-form
position for single sheets.
0/180, ..., 29/180 Increases top-of-form in
increments of 1/180 inch
(0.14 mm).
11.08.1998, 23:03 Uhr
USING SETUP MODE
Description
5 - 3 5
Advertisement
Table of Contents
