Fujitsu DL3700 Pro User Manual page 104

USING SETUP MODE
5 - 1 6
#05 Chapter 5
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
MENU2 Items
<FONT> TIMLS-N
(continued) TIMLS-B
TIMLS-I
DOWNLD# Font 0 or font 1 in the printer's
<QUALITY>
LETTER
REPORT
DRAFT
HI-DRFT
16
Options Description
download RAM
See Appendix F for font examples.
Select the print quality that most often
meets your needs.
Letter print quality. This option
provides the highest resolution but
the slowest print speed. It cannot be
used with the compressed font.
Report print quality. This option
provides lower resolution than letter
quality, but at twice the speed. If you
want only the double speed, regard-
less of fonts, use the correspondence
font. The quality of the correspond-
ence font is higher than that of report.
Regular draft print quality. This
option provides lower resolution than
report quality, but at 3.2 times letter
speed.
High-speed draft print quality. This
option provides lower resolution than
draft quality, but at 3.2 times letter
speed.
11.08.1998, 23:03 Uhr
User's Manual