Fujitsu DL3700 Pro User Manual page 49

User's Manual
#02 Chapter 2
For an IBM PC or compatible device, use the following MS-
DOS MODE commands to set the computer serial settings to
match the printer factory settings:
To activate these settings whenever you turn the computer on,
write the MODE commands in your AUTOEXEC.BAT file.
Make sure that the MODE.COM file is included in your root
directory.
You are now finished setting up and testing the printer. To familiarize
yourself with everyday printer operations, such as loading paper,
selecting print features, and printing, see Chapters 3 and 4.
27
Using MS-DOS to Specify Serial Interface Settings
MODE COM1:9600,N,8,1,P
MODE LPT1:=COM1
If the printer still doesn't work, consult your dealer or
someone experienced in serial interface communications.
21.08.1998, 23:47 Uhr
SETTING UP
2 - 2 7