Checking The Brake Oil Level; Braking System Fluid Top Up - PIAGGIO Beverly Tourer 300ie User Manual

Monoethylene glycol-based antifreeze fluid, CUNA NC 956-16

Checking the brake oil level (03_17)

The brake fluid reservoirs are found on the pumps under the front handlebar cover.
The procedures to check the brake fluid level for the front and rear brakes are identical.
Proceed as follows:
1. Place the scooter on its centre stand and make sure the handlebar is centred;
2. Loosen screw «A» and remove cover «B»;
3. Check the fluid level through the respective sight glass «C». A certain lowering of
03_17
the level is caused by wear on the pads.
Should the level appear to be below the minimum mark, please contact an Authorised
Service Centre or Dealer in order to have a thorough inspection of the braking system
carried out.

Braking system fluid top up (03_18, 03_19)

Proceed as follows:
Remove reservoir cover «D» and loosen the two screws «E» and top-up the brake
fluid level using only the prescribed brake fluid and without exceeding the maximum
level.
Under standard climatic conditions, replace coolant as indicated in the scheduled
maintenance table.
This operation must be carried out by trained personnel; take your vehicle to an au-
03_18
thorised Service centre or Dealer.
WARNING
BRAKING CIRCUIT FLUID IS HIGHLY CORROSIVE; DO NOT LET IT COME INTO
CONTACT WITH PAINTED PARTS.
49