Characteristics
Intermediate ring Standard coupling clear-
ance:0.02÷0.07 mm
Maximum clearances allowed after use: 0.10
mm
Oil scraper ring Standard coupling clearance:
0.01÷0.06 mm
Maximum clearances allowed after use: 0.10
mm
Replace the piston if clearances exceed the max-
imum limits specified in the table.
Crankcase - crankshaft - connecting rod
Diameter of crankshaft bearings.
Measure the bearings on both axes x-y.
Specification
Crankshaft alignment
Specific tooling
020335Y Magnetic support for dial gauge
Specification
CHAR - 12
CRANKSHAFT
Cat. 1
Cat. 2
MAX. ADMISSIBLE DISPLACEMENT
A =
B =
C =
D =
XEVO 400ie
Desc./Quantity
Standard diameter: 40.020÷40.026
Standard diameter: 40.026÷40.032
Desc./Quantity
0.15 mm
0.010 mm
0.010 mm
0.10 mm