Suspensions; Removing The Front Wheel; Front Wheel Hub Overhaul - PIAGGIO 2005 XEVO 400ie Workshop Manual

Suspensions

Front

Removing the front wheel

- Remove the fixing nut from the wheel axle on the
left side of the vehicle.
- Loosen the two screws fixing the wheel axle
clamp and remove the clamp.

Front wheel hub overhaul

Check that the wheel bearings do not show signs
of wear.
If you have to replace the wheel bearings, proceed
as follows:
- Remove the two bearings on the brake disc side
using pliers 14 and the special bell 9.
- Remove the internal spacer.
SUSP - 264
XEVO 400ie