Wan; Isp - Atlantis Land WebShare 241 ROUTER ADSL2+ A02-RA241 User Manual

3.6.3.2 WAN

Before you start installing this device, you have to check with your ISP what kind of service
(connection method) is provided such as PPPoE, PPPoA, RFC1483 bridged or routed, IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483
Bridged
RFC1483
Routed
IPoA
A WAN (Wide Area Network) is an outside connection to another network or the Internet.
There are three items within the WAN section: ISP, DNS and ADSL.

3.6.3.2.1 ISP

The factory default is PPPoE. If your ISP uses this access protocol, click Edit to input other
parameters as below. If your ISP does not use PPPoE, you can change the default WAN
connection entry by clicking Change.
A simpler alternative is to select Quick Start from the main menu on the left. See the Quick
Start section of the manual for more information.
Click Next in order to finish the configuration.
VPI/VCI, VC-based/LLC-based multiplexing,
Username, Password, Service Name, and
Domain Name System (DNS) IP address (it can
be automatically assigned from ISP or be set
fixed).
VPI/VCI, VC-based/LLC-based multiplexing,
Username, Password, and Domain Name
System (DNS) IP address (it can be
automatically assigned from ISP or be set
fixed).
VPI/VCI, VC-based/LLC-based multiplexing
VPI/VCI, VC-based/LLC-based multiplexing, IP
address, Subnet mask, Gateway address, and
Domain Name System (DNS) IP address (it is
fixed IP address).
VPI/VCI, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP
address (it is fixed IP address).
WEBSHARE 241
28