Table of Contents
Advertisement
The WebShare 241 can be configured with your Web browser. The web browser is included
as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows
95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for
configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate
with the WebShare 241, either to configure the device or for network access. These PCs
must have an Ethernet interface installed properly, be connected to the Router either directly
or through an external repeater hub, and have TCP/IP installed and configured to obtain an
IP address through a DHCP server or a fixed IP address that must be in the same subnet of
the ADSL Firewall Router. The default IP address of the WebShare 241 is 192.168.1.254 and
subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP
address from the WebShare 241. Also make sure you have UNINSTALLED any kind of
software firewall that can cause problems while accessing the 192.168.1.254 IP address of
the router.
Please follow the steps below for PC's network environment installation. First of all, please
check your PC's network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to MS Windows related manuals.
3.2 Connecting the WebShare 241
• Connect the WebShare 241 to a LAN (Local Area Network) and the ADSL/telephone
network.
• Power on the device
• Make sure the PWR is lit steady & LAN/ADSL LED is lit.
• Before taking the next step, make sure you have uninstalled any software firewall.
Any TCP/IP capable workstation can be used to communicate with or
through the WebShare 241. To configure other types of workstations,
please consult the manufacturer's documentation.
WEBSHARE 241
Chapter 3
Configuration
10
Advertisement
Table of Contents
