Lan And Wan Port Addresses; Information From The Isp; Configuring With The Web Browser - Atlantis Land A02-RA241-W54 User Manual

3.4.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
IP address
Subnet Mask
DHCP
function

3.5 Information from the ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
IPoA

3.6 Configuring with the Web Browser

Open the web browser, enter the local port IP address of this Wireless Router ADSL2+,
which defaults at http://192.168.1.254, and click "Go", a username and password window
will appear. The default username & password are admin & atlantis, in respectively
192.168.1.254
255.255.255.0
Enabled
server
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System
(DNS) IP address (it can be automatically assigned from
ISP or be set fixed).
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP
address (it can be automatically assigned from ISP or
be set fixed).
VPI/VCI, VC-based/LLC-based multiplexing and configure
this product into BRIDGE Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name
System (DNS) IP address (it is fixed IP address).
VPI/VCI, IP address, Subnet mask, Gateway address,
and Domain Name System (DNS) IP address (it is fixed
IP address).
WIRELESS ROUTER ADSL2+
WAN Port
N/A
18