3.6 Factory Default Settings
Before configurating this Router, you need to know the following default settings.
Web Configurator
Username : admin
Password: admin
Device IP Network settings in LAN site
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
WAN setting : Client DHCP
DHCP server : DHCP server enable
3.6.1 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown
below.
IP address
Subnet Mask
DHCP server
3.7 Reset
The default username and password are admin and admin respectively.
LAN Port
192.168.1.1
255.255.255.0
Enable
WAN Port
N/A