Factory Default Settings; Username And Password; Lan And Wan Port Addresses - Atlantis Land A02-RA242-W54 User Manual

Atlantis land adsl wireless router user's manual

Hide thumbs Also See for A02-RA242-W54:

Table of Contents

3.4 Factory Default Settings

Before configurating this WebShare 242W Wireless , you need to know the following default

settings.

• Username: admin

• Password : atlantis

• IP Address : 192.168.1.254

• Subnet Mask : 255.255.255.0

• DHCP server is enabled.

The default username and password are admin and atlantis respectively.

If you ever forget the password to log in, you may press the RESET button to

restore the factory default settings. After turning the router on press the

Emergency/Failure Recovery Button on the back of the modem, and hold the

button in until all lights on the modem flash and it reboots with factory default

settings (approximately 10 seconds). The login will be reset to admin and the

password will be reset to admin, and the modem will be accessible via its

default IP address at http://192.168.1.254/

The parameters of LAN and WAN ports are pre-set in the factory. The default values are

shown below.

WEBSHARE 242W

Table of Contents

Webshare 242w