Advanced; Static Routed - Atlantis Land WebShare 241 ROUTER ADSL2+ A02-RA241 User Manual

Adsl2+ router
Hide thumbs Also See for WebShare 241 ROUTER ADSL2+ A02-RA241:
Table of Contents

Advertisement

3.6.3.7 Advanced

Configuration options within the Advanced section are for users who wish to take advantage
of the more advanced features of the router. Users who do not understand the features
should not attempt to reconfigure their router, unless advised to do so by support staff.
• Static Route
• Dynamic DNS
• VLAN Control
• Device Management
• IGMP

3.6.3.7.1 Static Routed

Click on the Static Routing and then choose Create IP V4Route to get the below figure to
add a routing table.
• Destination: Enter the destination subnet IP.
• Gateway: Enter the gateway IP address which the packet is forwarded to.
• Netmask: Subnet mask of destination IP addresses based on above destination
subnet IP.
• Cost: This is the same meaning as Hop. Usually, leave it as 1.
• Interface: Enter the interface, which the packet is forwarded to.
WEBSHARE 241
64

Advertisement

Table of Contents
loading

This manual is also suitable for:

Webshare 241

Table of Contents