Table of Contents
Advertisement
3.2.1 Router/Bridge Mode
The default mode is Router Mode. If you want to switch between the two modes, click on
Advanced → Router/Bridge Mode in the left pane. Select the mode you want to use, and then
click the "Apply" button.
3.2.2 Password
The password is left blank as the default setting. When configuring your I-STORM ADSL
ROUTER with Web browser, just click "OK", and then you are logged in for the first time. It is
recommended that you set a password for security and management purpose. The I-STORM
ADSL ROUTER maintains the password only. It means the I-STORM ADSL ROUTER only
checks the password even you enter characters in the User Name field.
If you ever forget the password to log in, you should contact the dealer where you
bought this product.
3.2.3 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown
below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing from
192.168.1.100 through 192.168.1.199
(Actually, it can supports up to 253
users.)
Chapter 3 Configuration
WAN Port
PPPoE function is
enabled to automatically
get the WAN port
configuration from ISP,
but you have to set
username and password
first.
15
Advertisement
Table of Contents
