ASROCK M8 Series Manual page 32

4. Align the screw holes on the ODD + 2.5" HDD Tray with the screw holes on the chassis.
Fasten the five screws.
5. Connect the power and SATA data cables and the ODD SATA power connector.
6. Re-install the PSU.
Align the PSU with the starting line and then slide the PSU to the left until it reaches
the end line. Make sure that it clicks into place.
Re-plug the PSU power cable.
Secure the two screws securing the power supply unit.
2
3
M8
27