Configuring An M52L - Planar m52L Installation Manual

Configuring an m52L

After you select the picture source, most of the remaining setup is automatic,
although you can override the automatic settings and adjust them manually.
The source picture - from computer, video, DVD player - is not always perfect in its
size or resolution; it does not always conform exactly to a standard. The display can
compensate for this.
You'll find it easier to configure your displays when you perform the steps in the
following order:
• Select the Source (Picture) (See "Selecting the Source" on page 27)
• Adjust the Input Levels (See "Adjusting Input Levels" on page 33)
• Adjust Frequency and Phase (See "Adjusting Frequency and Phase" on page 39)
• Select the Scale Mode (See "Scale Mode Settings" on page 41)
• Adjust the Sharpness (See "Sharpness Settings" on page 47)
• Check the Image Position (See "Adjusting Position" on page 49)
• Set up Tiling for the image on multiple displays (See "Tiling a Display" on page
51)
• Adjust Scaling and Cropping (See "Zoom and Viewport" on page 55)
• Color Balance the displays (See "Adjusting Color Balance" on page 59)
m52L Installation Guide 25