Table of Contents
Advertisement
Adjusting Levels for Video Sources
8
9
10
38
If the color bar pattern has a pluge, you can use it to adjust Brightness. Pluge
stands for Picture Line-Up Generation Equipment. A pluge is used to calibrate the
black level on a video monitor.
Pluge
Although it is not required, we recommend that you save the configuration to a
memory slot. (See "Saving Configurations" on page 86)
If you have more than one source coming through the same connector, adjust
Input Levels for each source.
m52L Installation Guide
Adjust Brightness so you cannot
see the different between these
two marks,
but you can see the difference
between these two marks.
Advertisement
Table of Contents
