Table of Contents
Advertisement
Installation Checklist
Use this quick checklist to ensure you have performed the installation steps in the
correct order.
1
2
3
Unpacking and Checking Accessories
Accessories With Each m52L Display
Quick Start Guide
The Quick Start Guide provides the basic setup needed to get the m52L up and
running. It does not contain the detailed information included in this Installation
Guide.
Remote Control
The batteries are already installed.
Power Cord
For use in North America.
VGA Cable
15-pin cable for analog computer pictures
(although this is called a VGA cable, it carries
anything up to UXGA).
DVI-D Cable
For use with the monitor.
Note:
long-run VGA or DVI cable if your source is located far away from the display(s).
Brackets & Couplers
If you have more than one display and plan to create a video wall, brackets and
couplers are included to secure the displays to each other. The number of screen
brackets and couplers depend on the size of the proposed video wall.
Unpack the display and check the contents.
Install power and source cables:
• See "Connecting Source Cables" on page 19.
• See "Connecting Power" on page 21.
If you are tiling a video wall, install brackets on each display before you set up the
wall. (See "Screen Brackets for m52L" on page 15)
Although VGA and DVI cables are included with every unit, you may wish to obtain a
m52L Installation Guide
Installation Checklist
11
Advertisement
Table of Contents
