Table of Contents
Advertisement
Manually Selecting the Source
3
Note:
items will appear in this menu.
4
30
The
popup menu displays to the right of the
SOURCE
An al og
Dig i tal
Co m po n en t ( Y P b P r )
S-Vi de o
Co m po s it e
SDI
If the display does not have a VIM (Video Input Module) installed, only the first two
With the arrow keys, select the input connector you want and press
Within a second or two the display analyzes the picture, adjusts to it, and displays
it. If you see no picture:
a
If you see an "out of range" message on the display, the input from the source
cannot be displayed. Try changing the source's resolution output.
b
If you see a "source absent" message on the display, the data from the source
is not reaching the display. Try disconnecting and reconnecting the cables
between the source and the display, and make sure the source is powered on.
If the source is a laptop, ensure that the VGA output on the rear of the source
is enabled.
c
If no message is displayed, maybe the source has timed out and is displaying
a blank screen.
m52L Installation Guide
menu.
PICTURE
.
ENTER
Advertisement
Table of Contents
