Table of Contents
Advertisement
Quick Installation
1.
Connect either DVI, HDMI or DisplayPort Video Source from the monitor to the computer.
Make sure both monitor and computer are powered OFF. Please note. The monitor ships
with DisplayPort and HDMI cables only.
2.
Connect power adaptor to DC input of the monitor.
3.
Connect power cord to a properly grounded AC outlet, and then to the adaptor.
4.
Power-ON computer and then POWER-ON the monitor.
5.
Set the timing mode on your computer. Recommended resolution and refresh rate is
2560 x 1440 @60Hz.
Figure 1:
(not included)
DVI
(not included)
9
Advertisement
Table of Contents
