NETGEAR DGN3500 User Manual page 8

Figure 2.
Note:
If the wireless modem router is not configured (is in its factory
default state) when you log in, the Setup Wizard displays. See
Using the Setup Wizard
If the wireless modem router discovers a newer version of the firmware, you are asked if
you want to upgrade to the new firmware (see
details). If no new firmware is available, the following message displays.
Figure 3.
• Router Status screen. The Router Status screen displays if the wireless modem router
has not been configured yet or has been reset to its factory default settings. See
N300 Wireless Modem Router Status Information
You can use the Setup Wizard to automatically detect your Internet connection as
described in
Using the Setup Wizard
and manually configure your Internet connection as described in
Configuring Your ISP Settings
8 | Chapter 1: Connecting Y our Router to the Internet
N300 Wireless Gigabit ADSL2+ Mode m Router DGN3500 User Manual
on page 9.
Upgrading the Firmware
on page 9, or you can bypass the Setup Wizard
on page 10.
on page 52 for
on page 55.
Viewing or Manually
Viewing