NETGEAR DGN3500 User Manual page 20

Table 1. Wireless Settings
Settings
Wireless Station Access
List
Security Options
20 | Chapter 2: Configuring Y our Wireless Network and Security Settings
N300 Wireless Gigabit ADSL2+ Mode m Router DGN3500 User Manual
Description
This is disabled by default so that any computer configured with the correct
wireless network name or SSID can access to your wireless network. For
increased security, you can restrict access to the wireless network to only
specific computers based on their MAC addresses. See
access by MAC address
Disable. You can use this setting to establish wireless connectivity before
•
implementing wireless security. NETGEAR strongly recommends that you
implement wireless security.
WEP (Wired Equivalent Privacy). Use encryption keys and data encryption
•
for data security. Select 64-bit or 128-bit encryption. See
on page 24.
WEP
WPA-PSK (WiFi Protected Access Pre-Shared Key). Allow only computers
•
configured with WPA to connect to the wireless modem router.
WPA2-PSK Wi-Fi Protected Access with 2 Pre-Shared Keys). Allow only
•
computers configured with WPA2 to connect to the wireless modem router.
Mixed WPA-PSK + WP A2-PSK. Allow computers configured with either
•
WPA-PSK or WPA2-PSK security to connect to the wireless modem router.
WPA-802.1x.
•
For WPA or WPA2 configuration, see
•
WPA-PSK+WPA2-PSK Security
Restricting
Configuring
Configuring Mixed
on page 23.