Statistics - NETGEAR DGN3500 User Manual

Statistics

To view statistics, on the Router Status screen, click Show Statistics.
Figure 31.
The following table describes the wireless modem router statistics.
Item Description
System Up Time The time elapsed since the wireless modem router was last restarted.
Port The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time The time elapsed since this port acquired the link.
Poll Interval The intervals at which the statistics are updated in this screen.
• To change the polling frequency, enter a time in seconds in the Poll Interval field, and
click Set Interval.
• To stop the polling, click Stop.
58 | Chapter 4: Managing Your Network
N300 Wireless Gigabit ADSL2+ Mode m Router DGN3500 User Manual