NETGEAR DGN3500 User Manual page 64

• To allow access from any IP address on the Internet, select Everyone.
• To allow access from a range of IP addresses on the Internet, select IP Address
Range.
Enter a beginning and ending IP address to define the allowed range.
• To allow access from a single IP address on the Internet, select Only This
Computer.
Enter the IP address that will be allowed access.
3.
Specify the port number for accessing the management interface.
Normal Web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote management Web interface. Choose
a number between 1024 and 65535, but do not use the number of any common service
port. The default is 8080, which is a common alternate for HTTP.
4. Click Apply to have your changes take effect.
Note:
When accessing your wireless modem router from the Internet, type
your wireless modem router's WAN IP address into your browser's
address or location field, followed by a colon (:) and the custom port
number. For example, if your external address is 134.177.0.123 and
you use port number 8080, then enter http://134.177.0.123:8080 in
your browser.
64 | Chapter 4: Managing Your Network
N300 Wireless Gigabit ADSL2+ Mode m Router DGN3500 User Manual