Pptp - D-Link DWR-161 User Manual

Section 3 - Configuration
Choose this Internet connection if your ISP provides you with a PPTP account.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address:
PPTP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
D-Link DWR-161 User Manual
Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
E n t e r t h e i n f o r m a t i o n p r o v i d e d b y y o u r I S P .
(Only applicable for Static IP PPTP.)
E n t e r t h e i n f o r m a t i o n p r o v i d e d b y y o u r I S P .
(Only applicable for Static IP PPTP.)
E n t e r t h e i n f o r m a t i o n p r o v i d e d b y y o u r I S P .
(Only applicable for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP
dial-up.
Password that your ISP provides to you for PPTP dial-up.
Fill in with the same password in Password field.
Choose Always-on when you want to establish a PPTP
connection all the time. If you choose Connect-on-demand,
the device will establish a PPTP connection when local users
want to surf the Internet, and disconnect if there is no traffic
after a time period set in Maximum Idle Time.
The time of no activity to disconnect your PPTP session. Set
it to zero or choose Always-on to disable this feature.
Click Save Settings to save your changes, or click Don't
Save Settings to discard your changes.

PPTP

20