Admin - D-Link DWR-161 User Manual

Section 3 - Configuration
The Admin page allows you to change the Administrator password and enable Remote Management. The administrator has read/write
access while the user has read-only access. Only the administrator has the ability to change both admin and user account passwords.
Admin Password:
Remote Management:
IP Allowed to Access:
Port:
D-Link DWR-161 User Manual
ADMINISTRATOR
Enter and confirm the password that the
admin account will use to access the
router's management interface.
REMOTE MANAGEMENT
Remote management allows the
DWR-161 to be configured from
the Internet using a web browser. A
username and password is still required
to access the Web Management
interface. Usually only a member of your
network can browse the built-in web
pages to perform Administrator tasks.
This feature enables you to perform Administrator tasks from the remote (Internet) host.
Enter the Internet IP address of the PC that has access to the Broadband Router. If you enter an asterisk (*)
in this field, then anyone will be able to access the Router. Adding an asterisk (*) into this field could present
a security risk and is not recommended.
This is the port number used to access the router. Example: 8080 is the port used for the Web Management
interface.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.

Admin

40