D-Link DWR-161 User Manual page 17

Pocket router

Hide thumbs Also See for DWR-161:

Table of Contents

Section 3 - Configuration

The subsequent configuration pages will differ depending on the selection you make on this page.

Static IP Address

Connection:

DHCP Connection

(Dynamic IP Address):

Username/Password

Connection (PPPoE):

Username/Password

Connection (PPTP):

Username/Password

Connection (L2TP):

3G/4G Connection:

iBurst:

Wi-Fi Hotspot:

D-Link DWR-161 User Manual

Choose this option if your Internet Setup Provider provided you with IP Address information that has to be

manually configured. See page 17 for information about how to configure this type of connection.

Choose this if your Internet connection automatically provides you with an IP Address. Most cable modems

use this type of connection. See page 18 for information about how to configure this type of connection.

Choose this option if your Internet connection requires a username and password to connect. Most DSL modems

use this style of connection. See page 19 for information about how to configure this type of connection.

Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP). See page

20 for information about how to configure this type of connection.

Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See page 21 for

information about how to configure this type of connection.

Choose this option if you already use a SIM card for 3G/4G Internet service from your telecom company. See

page 22 for information about how to configure this type of connection.

Choose this option if your Internet connection requires an iBurst account. See page 23 for information about

how to configure this type of connection.

Choose this option if your Internet connection will be through an existing Wi-Fi hotspot. See page 24 for

information about how to configure this type of connection.

Table of Contents