Iburst - D-Link DWR-161 User Manual

Section 3 - Configuration
Choose this Internet connection if your ISP provides you with an iBurst account.
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS Server:
Secondary DNS Server:
Maximum Idle Time:
MTU:
Reconnect Mode:
NAT disable:
D-Link DWR-161 User Manual
User/account name that your ISP provides to you
for iBurst dial-up.
Password that your ISP provides to you for iBurst
dial-up.
Fill in with the same password in Password field.
(Optional) Fill in if provided by your ISP.
(Optional) Fill in if provided by your ISP.
Enter the primary DNS server.
Enter the secondary DNS server.
The time of no activity to disconnect established 3G/4G session. Set it to zero or choose Auto in Reconnect
Mode to disable this feature.
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value
is 1500.
Auto or Manual. Connect to iBurst network automatically or manually.
Click to disable Network Address Translation (NAT).
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.

iBurst

23