Installation; Install The Battery - D-Link DWR-161 User Manual

Section 2 - Installation
This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed
area such as a closet, cabinet, or in an attic or garage.
1. Turn off the power switch, open the battery lid, and then insert the Li-ion battery into the battery compartment.
Note: Do not insert or remove the Li-ion battery while the power switch is on.
2. Close the battery lid.
3. Connect the cable of the power adapter to the power port on the back panel of the DWR-161.
4. Plug the power adapter into a wall outlet.
Note: It will take about three hours to fully charge the battery for the first time. When the battery is fully charged, the power LED will
turn green.
5. Turn on the power switch.
D-Link DWR-161 User Manual

Installation

Install the Battery

7