D-Link DWR-161 User Manual page 30

Section 3 - Configuration
Wireless Channel:
Visibility Status:
Security Mode:
Radius Server IP:
Radius Port:
Radius Shared Key:
D-Link DWR-161 User Manual
Indicates the channel setting for the
DWR-161. By default the channel is set
to 11. This can be changed to fit the
channel setting for an existing wireless
network or to customize your wireless
network. Click Auto Channel Scan
to automatically select the channel
that it will operate on. This option is
recommended because the router
will choose the channel with the least
amount of interference.
Select Invisible if you do not want the
SSID of your wireless network to be
broadcasted by the DWR-161. The SSID
of your router will not be seen by Site
Survey utilities. Therefore while setting
up your wireless clients, you will have to
manually enter your SSID to connect to the router.
WIRELESS SECURITY MODE
This device supports three wireless security modes, WEP, WPA-Personal, WPA-Enterprise, or None. WEP is
the original wireless encryption standard. WPA provides a higher level of security and WPA-Personal does not
require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to authenticate
clients via a remote RADIUS server.
IP address of the RADIUS server.
The port used for the RADIUS server. The default port is 1812.
Key value shared by the RADIUS server and this device.
Please refer to Section 4 - Wireless Security for more information on security and encryption. Click Save
Settings to save your changes, or click Don't Save Settings to discard your changes.
26