Yaesu FTM-400DR Operating Manual page 161

9
Touch to select the band to be used for the
packet communication
The setting changes as follows each time it is
touched.
Tips • Refer to "Data communication settings" (
details.
• Factory default value: B-BAND FIX
10
Touch
11
Select and touch
The screen for the detailed settings will be displayed.
12
Touch to select the packet communication
speed
The setting will switch between "1200 bps" and "9600
bps" each time it is touched.
Tip Factory default value: 1200 bps
13
Touch
Select and touch
The screen for the detailed settings will be displayed.
15
Touch to select the squelch detection method
for the packet communication
The setting switches between "RX BAND" and "TX/
RX BAND" each time it is touched.
Tips • Refer to "Data communication settings" (
details.
• Factory default value: RX BAND
P.193) for
P.193) for
161