Using The Pager Function; Setting The Receive Station Code - Yaesu FTM-400DR Operating Manual

Use this function to call specified stations only by using a pager code that combines two
CTCSS tones.
The pager function does not work in the digital mode. Use the
switch the communications to the auto-mode select function (AMS) or analog mode.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
The menu list will be displayed.
3
Turn , or touch the screen to select
Touch
The code setting screen will be displayed.
5
Touch
The characters of the set value will turn orange in
color.
6
Turn to select the code
Select the first code from 01 to 50.
Tip Factory default value: 05
7
Touch
The characters of the set value will turn green in
color.
106
twice
key when beginning operations to