Inputting The Call Sign - Yaesu FTM-400DR Operating Manual

When switching the power on for the first time after purchasing, or after resetting
the device, a screen requesting the call sign of your own station be entered will be
displayed.
The call sign is used to identify the transmitting station when communicating in the
digital mode.
1
Touch the blinking
The display will change to the character input screen.
2
Touch a character key
The touched character will be displayed at the top of
the screen.
Enter each character of your call sign.
• Up to 10 characters (letters, numbers, and a hyphen )
can be entered.
• Refer to Page 23 on how to operate the character input
screen.
3
Touch
The screen will change.
Thereafter, the entered call sign is displayed at the
bottom of the power on screen, and the display will
switch to the frequency display screen (dual band
screen).
37